dmesg - Intel Core i5-2500K

Return To Intel Core i5-2500K System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-ARCH (eric@Mr_Pink) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Wed Feb 20 08:01:55 EST 2013
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf77ffff] usable
BIOS-e820: [mem 0x00000000cf780000-0x00000000cf7a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7a3000-0x00000000cf7dffff] ACPI data
BIOS-e820: [mem 0x00000000cf7e0000-0x00000000cf7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68X-UD3P-B3/Z68X-UD3P-B3, BIOS F8d 01/19/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 0D0000000 mask FF0000000 uncachable
  3 base 100000000 mask F00000000 write-back
  4 base 200000000 mask FC0000000 write-back
  5 base 230000000 mask FF0000000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5ca0-0x000f5caf] mapped at [ffff8800000f5ca0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xcf77ffff]
 [mem 0x00000000-0xcf5fffff] page 2M
 [mem 0xcf600000-0xcf77ffff] page 4k
kernel direct mapping tables up to 0xcf77ffff @ [mem 0x1fffa000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22f7fffff]
 [mem 0x100000000-0x22f7fffff] page 2M
kernel direct mapping tables up to 0x22f7fffff @ [mem 0xcf77a000-0xcf77ffff]
RAMDISK: [mem 0x37988000-0x37cbbfff]
ACPI: RSDP 00000000000f7890 00014 (v00 GBT   )
ACPI: RSDT 00000000cf7a3040 00054 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cf7a3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cf7a31c0 04CB8 (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 00000000cf780000 00040
ACPI: MSDM 00000000cf7a7fc0 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 00000000cf7a8080 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cf7a8100 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 00000000cf7a8200 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 00000000cf7a8240 02340 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 00000000cf7aa580 000C0 (v01 GBT             00000000      00000000)
ACPI: MATS 00000000cf7aa640 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG 00000000cf7aa6a0 00A6A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC 00000000cf7a7ec0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000cf7ab140 018B8 (v01  INTEL PPM RCM  80000001 INTL 20061109)
ACPI: MATS 00000000cf7aca00 0A8D6 (v01        MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022f7fffff]
Initmem setup node 0 [mem 0x00000000-0x22f7fffff]
  NODE_DATA [mem 0x22f7fc000-0x22f7fffff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226e00000-ffff88022edfffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22f7fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0xcf77ffff]
  node   0: [mem 0x100000000-0x22f7fffff]
On node 0 totalpages: 2092815
  DMA zone: 64 pages used for memmap
  DMA zone: 6 pages reserved
  DMA zone: 3913 pages, LIFO batch:0
  DMA32 zone: 13214 pages used for memmap
  DMA32 zone: 832482 pages, LIFO batch:31
  Normal zone: 19424 pages used for memmap
  Normal zone: 1223712 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
e820: [mem 0xcf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022f400000 s85376 r8192 d21120 u262144
pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060107
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8152184k/9166848k available (8229k kernel code, 795588k absent, 219076k reserved, 7002k data, 876k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	Dump stacks of tasks blocking RCU-preempt GP.
	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
NR_IRQS:4352 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.386 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.13 BogoMIPS (lpj=10974620)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20121018
ftrace: allocating 28077 entries in 110 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version:                3
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (26349.55 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcf780000-0xcf7a2fff] (143360 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0xD4, should be 0xD3 (20121018/tbutils-324)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io  0xff00-0xff07]
pci 0000:00:1f.2: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:1f.2: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:1f.2: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:1f.2: reg 20: [io  0xfb00-0xfb0f]
pci 0000:00:1f.2: reg 24: [io  0xfa00-0xfa0f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 10: [io  0xf800-0xf807]
pci 0000:00:1f.5: reg 14: [io  0xf700-0xf703]
pci 0000:00:1f.5: reg 18: [io  0xf600-0xf607]
pci 0000:00:1f.5: reg 1c: [io  0xf500-0xf503]
pci 0000:00:1f.5: reg 20: [io  0xf400-0xf40f]
pci 0000:00:1f.5: reg 24: [io  0xf300-0xf30f]
pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfb8c0000-0xfb8dffff 64bit]
pci 0000:01:00.0: reg 20: [io  0xce00-0xceff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
pci 0000:01:00.1: reg 10: [mem 0xfb8fc000-0xfb8fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [1002:6719] type 00 class 0x030000
pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xfb9c0000-0xfb9dffff 64bit]
pci 0000:02:00.0: reg 20: [io  0xbe00-0xbeff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa80] type 00 class 0x040300
pci 0000:02:00.1: reg 10: [mem 0xfb9fc000-0xfb9fffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.1:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1283:8892] type 01 class 0x060400
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:05:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:05:02.0: reg 14: [io  0xaf00-0xaf7f]
pci 0000:05:02.0: supports D2
pci 0000:05:02.0: PME# supported from D2 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:04:00.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 10: [mem 0xfbdf8000-0xfbdfffff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:07:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:07:00.0: reg 10: [mem 0xfbcf8000-0xfbcfffff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:08:00.0: reg 10: [io  0xee00-0xeeff]
pci 0000:08:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:08:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:09:00.0: [1b4b:917a] type 00 class 0x01018f
pci 0000:09:00.0: reg 10: [io  0xdf00-0xdf07]
pci 0000:09:00.0: reg 14: [io  0xde00-0xde03]
pci 0000:09:00.0: reg 18: [io  0xdd00-0xdd07]
pci 0000:09:00.0: reg 1c: [io  0xdc00-0xdc03]
pci 0000:09:00.0: reg 20: [io  0xdb00-0xdb0f]
pci 0000:09:00.0: reg 24: [mem 0xfbaff000-0xfbaff1ff]
pci 0000:09:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:00.0
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf780000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f800000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x0805] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io  0x0400-0x04cf] has been reserved
system 00:07: [io  0x04d2-0x04ff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io  0x1000-0x107f] has been reserved
system 00:08: [io  0x1080-0x10ff] has been reserved
system 00:08: [io  0x1100-0x117f] has been reserved
system 00:08: [io  0x1180-0x11ff] has been reserved
system 00:08: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:09: [io  0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:0b: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xcf780000-0xcf7dffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcf77ffff] could not be reserved
system 00:0b: [mem 0xcf7e0000-0xcf7fffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0b: [mem 0x40000000-0x400fffff] could not be reserved
system 00:0b: [mem 0xcf800000-0xcfffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.7: BAR 15: assigned [mem 0xf0400000-0xf04fffff pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb800000-0xfb81ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfb800000-0xfb8fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfb900000-0xfb91ffff pref]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.1:   bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:01.1:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:04:00.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.3:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.5: PCI bridge to [bus 07]
pci 0000:00:1c.5:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: PCI bridge to [bus 08]
pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.6:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:09:00.0: BAR 6: assigned [mem 0xf0400000-0xf040ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.7:   bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.7:   bridge window [mem 0xf0400000-0xf04fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: enabling device (0000 -> 0003)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:07: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf04fffff pref]
pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:0a: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:0a: resource 9 [mem 0xd0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3280k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb77a000-0xcf77a000] (64MB) mapped at [ffff8800cb77a000-ffff8800cf779fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1361752671.233:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
NTFS driver 2.1.30 [Flags: R/W].
EFS: 1.0a - 
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
NILFS version 2 loaded
BeFS version: 0.9.3
Btrfs loaded
ceph: loaded (mds proto 32)
msgmni has been set to 15928
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 16, io mem 0xfbdf8000
xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: irq 17, io mem 0xfbcf8000
xhci_hcd 0000:07:00.0: irq 43 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver emi62 - firmware loader
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Key type ceph registered
libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2013-02-25 00:37:51 UTC (1361752671)
Freeing unused kernel memory: 876k freed
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2000k freed
Freeing unused kernel memory: 1764k freed
usb 1-1: new high-speed USB device number 2 using ehci-pci
systemd-udevd[77]: starting version 197
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ahci 0000:09:00.0: version 3.0
ahci 0000:09:00.0: irq 44 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
scsi0 : ahci
scsi1 : ahci
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [
 P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
ata1: SATA max UDMA/133 abar m512@0xfbaff000 port 0xfbaff100 irq 44
ata2: SATA max UDMA/133 abar m512@0xfbaff000 port 0xfbaff180 irq 44
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
ata_piix 0000:00:1f.5: MAP [
 P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata6: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
firewire_ohci 0000:05:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 6-2: Parent hub missing LPM exit latency info.  Power management will be impacted.
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
firewire_core 0000:05:02.0: created device fw0: GUID 00656f1c9942cb00, S400
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3292.520 MHz
Switching to clocksource tsc
usb 2-1.7: new low-speed USB device number 3 using ehci-pci
ata3.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ata3.00: ATA-9: M4-CT128M4SSD2, 040H, max UDMA/100
ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32)
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input0
hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-1.7/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input1
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-1.7/input1
ata4.01: ATAPI: TSSTcorp DVDWBD SH-B123L, SB04, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   040H PQ: 0 ANSI: 5
ata4.01: configured for UDMA/100
scsi 3:0:1:0: CD-ROM            TSSTcorp DVDWBD SH-B123L  SB04 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:1:0: Attached scsi CD-ROM sr0
usb 2-1.8: new high-speed USB device number 4 using ehci-pci
 sdb: sdb1 sdb2 sdb3 sdb4
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 1-1.4.4: new full-speed USB device number 4 using ehci-pci
input: Logitech Gaming Mouse G400 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input2
hid-generic 0003:046D:C245.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Gaming Mouse G400] on usb-0000:00:1a.0-1.4.4/input0
hid-generic 0003:046D:C245.0004: hiddev0,hidraw3: USB HID v1.10 Device [Logitech Gaming Mouse G400] on usb-0000:00:1a.0-1.4.4/input1
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Temporary Directory...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Set Up Additional Binary Formats...
EXT4-fs (sda3): re-mounted. Opts: (null)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
systemd[1]: Mounting Huge Pages File System...
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7735 MBytes.
[fglrx]   vendor: 1002 device: 6719 count: 1
[fglrx]   vendor: 1002 device: 6719 count: 2
[fglrx] ioport: bar 4, base 0xce00, size: 0x100
[fglrx] ioport: bar 4, base 0xbe00, size: 0x100
pci 0000:02:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Feb 15 2013] with 2 minors
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting udev Coldplug all Devices...
systemd-udevd[160]: starting version 197
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: systemd-binfmt.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Set Up Additional Binary Formats.
systemd[1]: Unit systemd-binfmt.service entered failed state
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Setup Virtual Console.
ACPI: Requesting acpi_cpufreq
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Local File Systems (Pre).
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting RPC pipe filesystem...
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 45 for MSI/MSI-X
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:08:00.0: irq 46 for MSI/MSI-X
r8169 0000:08:00.0 eth0: RTL8168evl/8111evl at 0xffffc900054aa000, 1c:6f:65:c6:6c:87, XID 0c900800 IRQ 46
r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
systemd[1]: Starting Load Random Seed...
wmi: Mapper loaded
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
systemd[1]: Mounted RPC pipe filesystem.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
systemd[1]: Started Load Random Seed.
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
systemd[1]: Found device WDC_WD5000AAKX-001CA0.
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
gpio_ich: GPIO from 180 to 255 on gpio_ich
snd_hda_intel 0000:02:00.1: irq 49 for MSI/MSI-X
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input14
systemd[1]: Starting Sound Card.
systemd[1]: Reached target Sound Card.
systemd[1]: Found device WDC_WD5000AAKX-001CA0.
systemd[1]: Mounting /mnt/tits...
Adding 4554748k swap on /dev/sdb4.  Priority:-1 extents:1 across:4554748k 
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Mounted /mnt/tits.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Recreate Volatile Files and Directories...
systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
systemd-journald[168]: Received SIGUSR1
systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Initializing USB Mass Storage driver...
scsi6 : usb-storage 6-2:1.0
scsi7 : usb-storage 2-1.8:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
it87: Found IT8728F chip at 0x290, revision 1
it87: Beeping is supported
r8169 0000:08:00.0 eth0: link down
r8169 0000:08:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ea6b40)
fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 568
[fglrx] Firegl kernel thread PID: 569
[fglrx] Firegl kernel thread PID: 570
[fglrx] IRQ 50 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000 
[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000 
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
fglrx_pci 0000:02:00.0: irq 51 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 584
[fglrx] Firegl kernel thread PID: 585
[fglrx] Firegl kernel thread PID: 586
[fglrx] IRQ 51 Enabled
scsi 6:0:0:0: Direct-Access     Seagate  FA GoFlex Desk   0D14 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
scsi 7:0:0:0: Direct-Access     SAMSUNG  HM100UI               PQ: 0 ANSI: 2 CCS
sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 28 00 00 00
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
 sdd: sdd1 sdd2
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f8fc000, size:404000 
[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000 
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] Attached SCSI disk
r8169 0000:08:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sdb3): re-mounted. Opts: commit=0
fuse init (API version 7.20)

Return To Intel Core i5-2500K System Information